Request A Quote
Request A Quote
Request A Quote

Monel K500 Ferrule Fittings Manufacturer

What is Monel K500 Ferrule Fittings?
Monel K500 Ferrule Fittings are a mixture of Nickel and Copper with added Titanium and Aluminium. These supplementary materials proffer outstanding resistance features. Monel alloy K500 is a reliable solution that is hardened by cold working, and it consists of two crystalline solids that figure a single new solid. Measured commercial process readily manufactures Monel K500, and the gas tungsten arc achieves the best welding.

Monel Ferrule Tube Fittings are produced from double-ferrule and single-ferrule designs. These gas-tight seal fittings are easy to install, deliver a leak-tight, and are available to disassemble and reassemble. The price of Monel K500 per kg can vary depending on quantity, quality, and supplier factors. As per recent market research, the price of Monel K500 is ranged from approximately Rs. 3,000 to Rs. 5,000 per kg for ferrule fittings, depending on the supplier and quantity purchased.

JIS NW 5500 Ferrule Fittings, Monel 2.4375 Ferrule Fittings, Monel 2.4375 Single Ferrule Fittings, UNS N05500 Ferrule Fittings, Monel K500 Compression Fittings, Ready Stock of K500 Monel Ferrule Fittings, Monel K500 Ferrule Fittings Supplier in Mumbai, India.

Table of Content

Monel K-500 Male Connector, Alloy K500 Ferrule Fittings at Best Price In India, Alloy K500 Adapters, Monel 2.4375 Female Connector, K500 Monel Tube To Male and Female Fittings Stockist in India.

Features of Monel K500 Ferrule Fittings:
There are many good characteristics of these Monel K500 Ferrule Fittings, which are as follows:
• It is highly malleable, making it possible to form flexible pipes and tubes following client requirements quickly.
• It is particularly resistant to hydrofluoric and hydrochloric acids when they are de-aerated.
• These fittings possess extreme power and toughness over an extensive temperature range.
• Monel K500 Ferrule Fittings contain elevated levels of Nickel and have exceptional seawater corrosion.
• It also resists chloride-induced stress corrosion cracking.
• These Fittings have more features like sturdy construction, high tensile strength, easy installation, and long service life, which are useful if used with Monel 400 Instrumentation Valves.

Benefits of Monel K500 Ferrule Fittings
Monel K500 Ferrule Fittings offer a range of benefits that make them a popular choice in a variety of industries:
• Their high malleability allows for quick and easy customization of pipes and tubes to meet specific requirements. They also exhibit exceptional resistance to hydrofluoric and hydrochloric acids, making them ideal for harsh chemical environments.
• Their high strength and toughness over a wide temperature range make them well-suited for high-pressure and high-temperature applications. Monel K500 Ferrule Fittings are highly resistant to seawater corrosion, which makes them a preferred choice in marine engineering applications.
• Their sturdy construction, high tensile strength, easy installation, and long service life provide reliable and durable solutions for various applications.

Application of Monel K500 Ferrule Fittings:
Monel K500 Ferrule Fittings have stronger resistance in high-temperature and pressure applications. These Fittings have great mechanical power at sub-zero temperatures and have high resistance to seawater and alkaline areas. These Fittings have been utilized in numerous applications, such as Heat Exchangers and Oil refineries, and these are broadly consumed in marine engineering and chemical processes. Monel Fittings has excellent resistance to rapidly flowing seawater.

Kalp Industries is a leading manufacturer and seller of first-class Monel K500 Ferrule Fittings. We offer all Monel K500 in various specifications like diverse sizes, shapes, and extents. We are also producing appropriate Monel K500 Tubing as per customers’ needs.

Specification For Monel K500 Ferrule Fittings

Imperial Size 1/2″ to 2″
Size 1/16”OD to 2”OD, 2mm OD to 50mm OD
Thread NPT, BSP, BSPT, UNF, ISO, SAE, MS, AN, weld ends etc.
Pressure Rating 6000PSI for Monel, 300/1000/3000PSI for Brass
Temperature Ratings Up to 1000°F (537°C)
Types Tube to Union, Tube to Male, Tube to Female, Instrument Pipe Fittings, Accessories
Application Power/ gas/ petroleum/ chemical/ metallurgy/ shipbuilding etc.
Our service
  • Nace Mr 01 75
  • Sour Service
  • Impact Test As Per Ug 84
  • Macro Structure Analysis
  • Hydrogen Induce Cracking Test (Hic)
  • Sulphide Stress Cracking Test (Sscc)
  • Cryogenic Services (Cryo),hydrogen Services (H2)
  • Helieum Leak Test
  • Dye Peniterant Test (Dp)
  • Magnetic Partius Test (Mp)
  • Post Weld Heat Treatment (Pwht)
  • Ultrasonic Test (Ut)
  • Hydro Test, Etc.
Test Certificates
  • EN 10204/3.1B
  • Raw Materials Certificate
  • 100% Radiography Test Report
  • Third Party Inspection Report, etc
Production Technique Forged/ Heat treated and machined.
Monel K500 Ferrule Fittings

STOCKIST & SUPPILERS FOR Monel K500 FERRULE FITTINGS IN INDIA, CUSTOM SIZES Monel Alloy K500 SINGLE FERRULE FITTINGS, DOUBLE FERRULE FITTINGS, COMPRESSION TUBE FITTINGS AS PER CLIENT REQUIREMENT

Equivalent Grades Of Monel K500 Ferrule Fittings

STANDARD WERKSTOFF NR. UNS
Monel K500 2.4375 N05500

Various Types of Monel K500 Ferrule Fittings

Tube To Union

Monel K500 Tube To Union

  • Monel® Alloy K500 Tube To Union
  • Monel K500 Female Threaded 90 Degree Union
  • K500 Monel Tube To Union
  • Monel K500 Union Tee
  • Monel® Alloy K500 Union Elbow
  • K500 Monel Male Union 90° Elbow
  • Monel K500 Tube To Union
  • Alloy K500 Bulkhead Union
  • Monel K500 Union Cross
Tube to Male Fittings

Monel K500 Tube to Male Fittings

  • K500 Monel Alloy Tube to Male Fittings
  • Alloy K500 Male Elbow NPT
  • Monel Alloy K500 Tube to Male Fittings
  • Monel Alloy K500 Male Bulkhead Connector
  • Monel® Alloy K500 Male Run Tee
  • Monel K500 Male Elbow 45 Degree
  • Monel® Alloy K500 Tube to Male Fittings
Tube to Female Pipes

Monel K500 Tube to Female Pipes

  • K500 Monel Tube to Female Pipe
  • Monel K500 Female Bulkhead Connector
  • Monel K500 Female Branch Tee
  • Monel® Alloy Female Connector NPT Metric Series
  • Monel Alloy K500 Tube to Female Pipe
  • Monel® Alloy K500 Female Elbow
  • Alloy K500 Female Connector NPT Imperial Series
  • Alloy K500 Tube to Female Pipe

Ready Stock Of Monel K500 Ferrule Fittings

  • Monel K500 Single Ferrule Compression Fittings
  • Alloy K500 Female Manometer Connector
  • Monel Alloy K500 Sanitary Ferrule Fittings
  • Monel K500 Male Adaptor
  • Monel Alloy K500 Male Adapter
  • Monel K500 Twin Ferrule Compression Fittings
  • K500 Monel Double Ferrule Fittings
  • Type K500 Monel Double Ferrule Tube Fittings
  • K500 Monel Hose-to-Pipe Adapter
  • K500 Monel Instrumentation Tube Fittings
  • Grade K500 Ferrule Fittings
  • Monel K500 Bulkhead Female Connector
  • Alloy K500 Bulkhead Reducer
  • Alloy K500 Female Connector
  • Alloy K500 Front and Back Ferrule
  • K500 Monel Female Elbow
  • Alloy K500 Positionable Male Run Tee
  • Monel Alloy K500 Female Adaptor
  • Nickel Alloy K500 Female Run Tee
  • Monel K500 45 Deg. Positionable Male Elbow
  • K500 Monel Compression Fittings
  • K500 Monel Alloy Male Run Tee
  • Alloy K500 O Seal Male Adaptor

Monel K500 Ferrule Fittings Dimensions

METRIC RANGE Dimension in mm  
Part T P L1 M C D F G H N
N0 mmo/d   Length       Body Nut Body  
4mMC2 4 1/8′ 31.35 9.53 16.67 14.29 12 12 24.21 10.72
4mMC4 4 1/4′ 35.72 14.29 16.67 14.29 14 12 29.37 15.88
6mMC2 6 1/8′ 33.34 9.53 18.26 15.88 14 14 25.40 11.11
6mMC4 6 1/4′ 33.34 14.29 18.26 15.88 14 14 30.16 12.70
6mMC6 6 3/8′ 38.89 14.29 18.26 15.88 19 14 30.96 13.49
6mMG8 6 1/2′ 44.45 19.05 18.26 15.88 22 14 36.51 15.88
8mMC2 8 1/8′ 34.53 9.53 19.05 16.67 14 17 26.59 11.51
8mM04 8 1/4′ 39.29 14.29 19.05 16.67 14 17 31.35 13.10
10mM02 10 1/8′ 35.72 9.53 19.84 17.46 17 19 27.78 11.91
10mMC4 10 1/4′ 40.48 14.29 19.84 17.46 17 19 32.54 13.49
10mMC6 10 3/8′ 40.48 14.29 19.84 17.46 19 19 32.54 13.49
10mMC8 10 1/2′ 46.04 19.05 19.84 17.46 22 19 38.10 15.88
10mMC12 10 3/4′ 46.83 19.05 19.84 17.46 27 19 38.89 15.08
12mMC4 12 1/4′ 43.66 14.29 22.23 23.02 22 22 33.34 11.11
12mMC6 12 3/8′ 43.66 14.29 22.23 23.02 22 22 33.34 11.11
12mMC8 12 1/2′ 48.42 19.05 22.23 23.02 22 22 38.10 12.70
12mM012 12 3/4′ 49.21 19.05 22.23 23.02 27 22 38.89 11.91
16mMC6 16 3/8′ 44.45 14.29 22.23 24.61 24 27 34.13 10.32
16mMC8 16 1/2′ 49.21 19.05 22.23 24.61 24 27 38.89 11.91
16mMC12 16 3/4′ 49.21 19.05 22.23 24.61 27 27 38.89 10.32
18mMC8 18 1/2′ 50.80 19.05 22.23 24.61 27 30 40.48 13.49
18mMC12 18 3/4′ 50.80 19.05 22.23 24.61 27 30 40.48 10.32
18mMC16 18 1″ 56.36 23.81 22.23 24.61 36 30 46.40 14.29
20mMC8 20 1/2′ 50.80 19.05 22.23 24.60 27 30 40.48 13.49
20mM012 20 3/4′ 50.80 19.05 22.23 24.61 27 30 40.48 10.32
20mM016 20 1″ 56.36 23.81 22.23 14.61 36 30 46.04 14.39
25mMC12 25 3/4′ 57.15 19.05 26.19 30.96 36 41 45.24 11.91
25mMC16 25 1″ 61.91 23.81 26.19 30.96 36 41 50.01 13.49
METRIC RANGE Dimention in Inches  
Part T P L1 M C D F G H N
N0 mmo/d   Length       Body Nut Body  
1MC1 1/16 1/16 .94 .38 .44 .34 5/16 5/16 .78 .34
1MC2 1/16 1/8 1.00 .38 .44 .34 1/2 5/16 .84 .41
2MC1 1/8 1/16 1.19 .38 .63 .53 1/2 7/16 .91 .41
2MC2 1/8 1/8 1.19 .38 .63 .53 1/2 7/16 .91 .41
2MC4 1/8 1/4 1.41 .56 .63 .53 9/16 7/16 1.13 .50
3MC2 3/16 1/8 1.21 .38 .63 .54 7/16 1/2 .95 .43
3MC4 3/16 1/4 1.42 .38 .63 .54 9.16 1/2 1.16 .54
4MC1 1/4 1/16 1.29 .56 .70 .60 1/2 9/16 1.00 .46
4MC2 1/4 1/8 1.29 .56 .70 .60 1/2 9/16 1.00 .45
4MC4 1/4 1/4 1.50 .75 .72 .63 9/16 9/16 1.19 .50
4MC6 1/4 3/8 1.51 .38 .70 .60 11/16 9/16 1.19 .56
4MC8 1/4 1/2 1.73 .56 .70 .60 7/8 9/16 1.44 .67
5MC2 5/16 1/8 1.34 .38 .73 .64 9/16 5/8 1.05 .46
5MC4 5/16 1/4 1.52 .56 .73 .64 9/16 5/8 1.23 .54
6MC2 3/8 1/8 1.38 .56 .76 .66 5/8 11/16 1.09 .48
6MC4 3/8 1/4 1.57 .75 .76 .66 5/8 11/16 1.28 .57
6MC6 3/B 3/8 1.57 .75 .76 .66 11/16 11/16 1.28 .56
6MC8 3/B 1/2 1.79 .56 .76 .66 7/8 11/16 1.50 .67
6MC12 3/8 3/4 1.82 .56 .76 .66 1-1/16 11/16 1.53 .68
8MC4 1/2 1/4 1.17 .75 .86 .90 13/16 7/8 1.31 .47
8MC6 1/2 3/8 1.71 .75 .86 .90 13/16 7/8 1.31 .46
8MC8 1/2 1/2 1.90 .56 .86 .90 7/8 7/8 1.50 .54
8MC12 1/2 3/4 1.93 .75 .86 .90 1-1/16 7/8 1.53 .55
10MC6 5/8 3/8 1.74 .56 .86 .96 15/16 1 1.34 .43
10MC8 5/8 1/2 1.93 .75 .86 .96 15/16 1 1.53 .51
10MC12 5/B 3/4 1.93 .75 .86 .96 1-1/16 1 1.53 .49
12MC8 3/4 1/2 1.99 .75 .86 .96 1-1/16 1-1/8 1.59 .57
12MC12 3/4 3/4 1.99 .75 .86 .96 1-1/16 1-1/18 1.59 .55
12MC16 3/4 1 2.21 .94 .86 .96 1-3/16 1-1/8 1.81 .68
16MC12 1 3/4 2.26 .75 1.04 1.23 1-3/8 1-1/2 1.78 .55
16MC16 1 1 2.45 .94 1.04 1.23 1-3/8 1-1/2 1.97 .65

Monel K500 Ferrule Fittings Chemical Composition

Grade C Mn Si S Cu Fe Ni
Monel K500 0.25 max 1.5 max 0.5 max 0.010 max 27.00 – 33.00 0.5 – 2 63.00 min

K500 Monel Ferrule Fittings Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Monel K500 8.44 g/cm3 1350 °C (2460 °F) Psi – 160000 , MPa – 1100 Psi – 115000 , MPa – 790 20 %

We Serve Application Industry

Fastener applications are as diverse as the industries they serve driven primarily by the aerospace, railway, construction and automotive industries with petrochemical, nuclear, medical, Oil & Gas, Chemical, Pharmaceutical, Food & Beverage, Nuclear, Thermal Power plants, Paper and Pulp, marine and mining, etc.

Aerospace Industry
Aerospace Industry
Construction Industry
Construction Industry
Mineral & Mining Industry
Mineral & Mining Industry
Oil and Gas Industry
Oil and Gas Industry
Petrochemical Industry
Petrochemical Industry
Monel K500 Reducing Union Tee Supplier In india, Monel K500 Industrial Tube to Adapter Supplier in India, Alloy K500 Reducing Union Supplier In india, K500 Monel Tube to Female Pipe Stockist in mumbai, Alloy K500 Male Branch Tee Supplier In india, Alloy K500 Tube To Union Manufacturer in India, K500 Monel Tube to Female Pipe Manufacturer in India, Monel K500 Tube to Male Fittings Stockist, K500 Monel Ferrule Fittings Manufacturer in Mumbai, Monel K500 Union Tee Manufacturers.

We Export Monel K500 Ferrule Fittings Across the Globe

Sweden, Tibet, Tunisia, Yemen, Spain, Estonia, Japan, Croatia, Belarus, Singapore, Mexico, Egypt, Greece, Costa Rica, Finland, Libya, Mongolia, Portugal, Angola, Argentina, Saudi Arabia, Algeria, Lithuania, Nigeria, Pakistan, United Kingdom, Kenya, Bolivia, Iraq, Taiwan, Kuwait, Thailand, Colombia, Mexico, Norway, Jordan, Hong Kong, Bahrain, Indonesia, Serbia, Australia, Switzerland, Puerto Rico, Morocco, Namibia, Zimbabwe, Peru, Sri Lanka, Malaysia, China, Ghana, Brazil, Iran, Chile, Venezuela, Macau, Turkey, Oman, Bulgaria, Iran, Canada, Romania, Chile, South Africa, Denmark, Germany, Slovakia, Gabon, Ecuador, Lebanon, Poland, Ireland, Hungary, Ukraine, India, Netherlands, Nigeria, United Arab Emirates, Azerbaijan, Israel, Kazakhstan, Qatar, France, Russia, Bangladesh, New Zealand, Philippines, Austria, South Korea, Vietnam, Afghanistan, Belgium, Italy, Czech Republic, Nepal, Poland, Bhutan, Trinidad & Tobago, Gambia, United States.

Domestic Supply Monel K500 Ferrule Fittings

Hyderabad, Kolkata, Jamshedpur, Haryana, New Delhi, Thiruvananthapuram, Ernakulam, Surat, Ludhiana, Thane, Nagpur, Ranchi, Kanpur, Secunderabad, Noida, Gurgaon, Pimpri-Chinchwad, Visakhapatnam, Baroda, Vadodara, Chennai, Bengaluru, Jaipur, Pune, Chandigarh, Howrah, Bhopal, Ahmedabad, Faridabad, Navi Mumbai, Mumbai, Rajkot, Colombo, Nashik, Indore, Coimbatore.

Our Products

Have Any Questions?

Call Us : +91 22 2388 9590
Email : info@kalpind.com

Quick Contact

If you have any questions or need help, feel free to contact with our team.
Sriniwas Building No 40, Office No 20, 1st floor, 2 Carpenter Street Mumbai – 400004

Company

Products

Products Catalogue

Download PDF
Facebook-f Linkedin
©2022 Kalp Industries, All Rights Reserved. With Love by Rathinfotech