Kalp Industries is an established manufacturer, exporter, stockist, dealer, stockholder, and supplier of high-quality Stainless Steel 347 Pipe Fittings that are manufactured to meet national and international raw material specifications.
Stainless Steel 347H Pipe Fittings are manufactured out of an austenitic steel grade that contains columbium, one of the several grades of stainless steel. They have excellent forming and welding capabilities and are widely used at exceptionally high temperatures. Stainless steel 347 Weld fittings with columbium added prevent against intergranular corrosion. It also shows improved resistance to corrosion in an environment with heavy oxidation. They are widely used for increasing, setting, and connecting various items.
Table of Content
Stainless Steel 347 Pipe Fittings have high deformation and stress-to-rupture qualities. Using standard fusion and sensitization techniques, they can be melted together. However, oxyacetylene welding is not recommended for these ASTM A403 WP 347 90-degree elbows. The temperature at which chromium carbide precipitation occurs ranges from 427 degrees Celsius to 816 degrees Celsius. They demonstrate resistance to corrosion between granules. Tantalum is added to stainless steel 347H Lateral Tee to stabilize it against chromium carbide precipitation.
The incorporation of columbium accounts for the majority of the principal features of the UNS S34700 Concentric Reducer. It is ideally non-magnetic in the annealed state and can only be toughened through cold processing. DIN 1.4550 Stainless steel Heat exchanger tubes, pressure tanks and vessels, boilers, furnace sections, and boilers all use pipe bends. Furthermore, A403 WP347H Stub End is used in the pulp and paper, oil and petrochemical sectors, and high-temperature chemical processing equipment. They come in a range of types, including stubs, tees, tubes, reducers, and end caps, and they are robust.
Standards | ASTM A403 / ASME SA403 |
Dimensions | ASME/ANSI B16.9, ASME B16.28, MSS-SP-43, BS4504, BS4504, BS1560, BS10 |
Size |
|
Type | Seamless / Welded / Fabricated |
Thickness | SCH10, SCH20, SCH30, STD SCH40, SCH60, XS, SCH 80, SCH 100, SCH 120, SCH 140, SCH 160, XXS available with NACE MR 01-75 |
Bending Radius | R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom |
STANDARD | WERKSTOFF NR. | UNS | JIS | GOST | EN |
SS 347 | 1.4550 | S34700 | SUS 347 | 08Ch18N12B | X6CrNiNb18-10 |
SS 347H | 1.4961 | S34709 | SUS 347H | – | X6CrNiNb18-12 |
All Fittings | 90°and 45° Ells and Tees | Reducers and Lap Joint Stub | Caps | 180° Returns | Angularity Tol | |||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Nominal Pipe Plane Size (NPS) | Outside(1) Diameter at Bevel | Inside(1) Diameter at End | Wall(2) Thickness | Centre-to- End Dimension A,B,C,M | Overall Length L | Overall Length E | Centre-to- Centre Dimension O | Back-to- Face Dimension K | Alignment at Ends U | Nominal Pipe SIze | Off Angle Q | Off Angle P |
1/2 TO 2-1/2 | +1/16 | ±1/32 | Not less than 87-1/2% of Normal Thickness | ±1/16 | ±1/16 | ±1/8 | ±1/4 | ±1/4 | ±1/32 | 12 to 4 | 1/32 | 1/16 |
-1/32 | 5 to 8 | 1/16 | 1/8 | |||||||||
3 TO 3-1/2 | ±1/16 | ±1/16 | ±1/16 | ±1/16 | ±1/8 | ±1/4 | ±1/4 | ±1/32 | 10 to 12 | 3/32 | 3/16 | |
4 | ±1/16 | ±1/16 | ±1/16 | ±1/16 | ±1/8 | ±1/4 | ±1/4 | ±1/32 | 14 to 16 | 3/32 | 1/4 | |
5 TO 8 | +1/32 | ±1/16 | ±1/16 | ±1/16 | ±1/4 | ±1/4 | ±1/4 | ±1/32 | 18 to 24 | 1/8 | 3/8 | |
-1/16 | ||||||||||||
10 TO 18 | +1/16 | ±1/8 | ±3/32 | ±3/32 | ±1/4 | ±3/8 | ±1/4 | ±1/16 | All dimensions are in inches | |||
-1/8 | ||||||||||||
20 TO 24 | +1/4 | ±3/32 | ±3/32 | ±3/32 | ±1/4 | ±3/8 | ±1/4 | ±1/16 | ||||
-3/32 |
Grade | C | Mn | Si | P | S | Cr | Cb | Ni | Fe |
SS 347 | 0.08 max | 2.0 max | 1.0 max | 0.045 max | 0.030 max | 17.00 – 20.00 | 10xC – 1.10 | 9.00 – 13.00 | 62.74 min |
SS 347H | 0.04 – 0.10 | 2.0 max | 1.0 max | 0.045 max | 0.030 max | 17.00 – 19.00 | 8xC – 1.10 | 9.0 -13.0 | 63.72 min |
Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
8.0 g/cm3 | 1454 °C (2650 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 35 % |
We Serve Application Industry
Fastener applications are as diverse as the industries they serve driven primarily by the aerospace, railway, construction and automotive industries with petrochemical, nuclear, medical, Oil & Gas, Chemical, Pharmaceutical, Food & Beverage, Nuclear, Thermal Power plants, Paper and Pulp, marine and mining, etc.
Hyderabad, Kolkata, Jamshedpur, Haryana, New Delhi, Thiruvananthapuram, Ernakulam, Surat, Ludhiana, Thane, Nagpur, Ranchi, Kanpur, Secunderabad, Noida, Gurgaon, Pimpri-Chinchwad, Visakhapatnam, Baroda, Vadodara, Chennai, Bengaluru, Jaipur, Pune, Chandigarh, Howrah, Bhopal, Ahmedabad, Faridabad, Navi Mumbai, Mumbai, Rajkot, Colombo, Nashik, Indore, Coimbatore.
©2022 Kalp Industries, All Rights Reserved. Made With ❤ by Rathinfotech